Problem
When I run the mount(ADM) command, the root filesystem isn't shown as mounted. That is, there is no line like the following:
/ on /dev/root read/write on Wed May 28 15:08:09 1997
When I try to use the Backup Manager to back up the root filesystem, it fails; activating the "Details" button shows the following error message:
Could not mount filesystem host.domain /dev/root Canceling backup General failure occured in processing the request. The mount action failed to mount /. mount: /dev/root is already mounted, / is busy, or allowable number of mount points exceeded: Device busy (error 16)
During system bootup, you may see the following error message:
su: /dev/null: cannot createA wide range of other failures may arise in an otherwise normally functioning system from the causes described below.
Cause
/dev/null may have the wrong file type; the permissions on /dev/null or the /dev directory may be incorrect.
The correct file types and permissions are:
drwxr-xr-x 21 bin bin 9216 Jun 2 08:54 /dev
crw-rw-rw- 1 root sys 4, 2 Jun 2 09:06 /dev/null Solution
Compare the file type and permissions of /dev and /dev/null to those given above. ("#" indicates the root command line prompt):
# ls -l -d /dev /dev/nullIf you find a discrepancy, take the following steps. If the file type of /dev/null is not as shown above (character special device), with the system in maintenance mode, remove and re-create that device node:
# rm /dev/null
# mknod /dev/null c 4 2Set the correct permissions and confirm:# chmod 755 /dev
# chmod 666 /dev/null
# ls -l -d /dev /dev/nullShutdown and reboot. See also
TA105027, "dynamic linker: /etc/devnm: Cannot open /dev/zero for
file /lib/libprot.so.1 ".The manual pages for mount(ADM), setmnt(ADM), bcheckrc(ADM), null(F), ls(C), mknod(C), and chmod(C).