Technical article 102442

"mount: Invalid fs type (NFS)" when trying to mount NFS filesystem on 5.0.2

OpenServer 5.0.2

Written · Last revised

Problem

I have properly configured my SCO OpenServer Enterprise System Release 5.0.2 as an NFS client, yet when I try to mount a NFS filesystem by entering the command:

# mount -f NFS servername:/filesystemname /mountpoint

the mount fails with this error message:

mount: Invalid fs type (NFS)

Solution

This message could indicate that you do not have any NFS chain
configured on your system.  To add an NFS chain, reboot your
system, enter System Maintenance mode, and type:
# scoadmin network
where '#' is the root prompt.  This will bring up the Network
Configuration Manager.

The screen will next display the information for the loopback driver along with the information for the network adapter you configured to use TCP/IP.

Select 'SCO TCP/IP' that you see indented, under 'HW SCO TCP/IP
Loopback driver'.  Next, select ADD NEW from the Protocol menu.
This will give you the option to add the NFS protocol.

If your modifications to protocols have altered kernel parameters, you will be prompted to relink the kernel when the manager exits. If you do not answer 'Yes' at this time, you can do so later by selecting 'Rebuild Kernel' in the Hardware/Kernel Manager. You must reboot your system before changes to the kernel take effect.

See also

Chapter 15, "Configuring the Network File System (NFS)" in the Networking Guide.

Chapter 25, "Configuring Network Connections" in the SCO OpenServer Handbook.

From the Xinuos technical article database, record 102442. Reproduced with permission. The original is at www.sco.com/ta/102442, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.