Technical article 118293

My Compaq OpenServer 5.0.x machine will not automatically reboot.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

The system will not automatically reboot.  Issuing either of the
commands listed below will not cause the system to automatically
reboot and the system has to be manually powered off:
       # init 6
OR:
# shutdown -i6

Cause

There was a problem with the ciss driver not communicating properly with the Compaq Smart Array 5300 controller.

Solution

This problem is fixed in EFS 5.48.  This EFS can be downloaded from
the New HP at the following URL:
(due to the Compaq and HP merger, this URL can change without notice)
https://www.hpe.com
Please remove the old EFS and install this new EFS and reboot your
system.  The system will now be able to automatically reboot upon
issuing the init 6 or shutdown -i6 commands.
NOTE:     When adding new disks using the "ciss" BTLD on the Compaq SmartArray
          5300 RAID Controller use the new "mkdev cpqciss" command not "mkdev
          hd" when adding additional disks.  This feature is supplied by the
          Compaq EFS Utility disks by adding the Compaq Intelligent Storage
          Subsystem Driver.  This allow you to create any new appropriate
          device nodes in /dev.  "mkdev hd" will still work, but only on the
          device nodes that are created by default when the system is installed.
"mkdev cpqciss" calls "mkdev hd" so when you run the command for the
first time it will suggest you re-boot the server and run "mkdev hd"
for the second time.  You need to run "mkdev cpqciss" for the second
time.

From the Xinuos technical article database, record 118293. Reproduced with permission. The original is at www.sco.com/ta/118293, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.