Problem
When I try to install SCO OpenServer 5.0.5 on my Compaq 800 machine (with the specific hardware noted above), it fails to install and generates a kernel panic:
Kernel Trap type 0x0000000E Cause
The IDA driver on the SCO OpenServer 5.0.5 installation disk does not function correctly with Compaq's latest IDA hardware.
Solution
You will need to obtain the latest BTLD disk from SCO's ftp site at:
https://ftp.scoexpert.com/SLSThe filename is oss604a.boot. To transfer it to a floppy disk using
dd or rawrite, follow the instructions given in ta105694. At this
point, you should reboot the machine and begin the installation
again with the updated boot disk.At the boot: prompt, enter the following boot string:
defbootstr disable=ida link="cha ida" hd=ida(0) Srom=wd(1,0,0,0)Depending on your hardware configuration, you will have to edit the Srom entry according to your setup.
During the installation, it is possible that, at approximately 76%, you will receive this error:
memsize: invalid checksum
/opt/K/SCO/link/1.1.1/Eb/etc/conf/bin/iddeftune:test: argument
expectedPress <Enter> to continue.Press <Enter>. This error should not affect the remaining installation process.
At this point, your installation should proceed as expected.
See also
ta105694, "How to transfer supplements from a DOS system to a UNIX system and create diskettes for UNIX on a DOS system."
ta110261, "What is SLS OSS604A, the BTLD Installation Supplement for SCO OpenServer 5.0.5?"