Technical article 110615

My DHCP client on Windows 95 or 98 has lost the network.

OpenServer 5.0.5UnixWare 7.0.0UnixWare 7.0.1UnixWare 7.1.0

Written · Last revised

Problem

My Windows 95 or 98 system is supposed to obtain an IP address
from an SCO DHCP server on my network.  For some reason, this
DHCP client system has lost the network and cannot ping other
systems, bring up web pages, and so on.  What can I do to
diagnose this problem at the Windows client?

Cause

Since a Windows DHCP client should have the network interface
set to "Obtain an IP address automatically," a method is
needed to show what IP address and other network information
the client actually obtains, in case it is inaccurate.

Solution

The Windows utility "winipcfg.exe" may be used to find out the network information for the Ethernet Adapter in the system. To launch this utility:

- Click on the Windows Start button and select Run from the pop-up menu.

- Type in either the full path to "c:\windows\winipcfg", or simply "winipcfg" and click OK.

(If there is any problem with the program launching due to an incorrect path, then use the Browse option to locate it).

The utility will display the network adapter's Adapter Address
(also known as MAC address), its IP Address, Subnet Mask, and
Default Gateway.  The MAC address is unlikely to be incorrect,
but if any of these other variables are wrong, then they will
need to be corrected for proper networking to resume.  The
following may need to be checked:
1. Is the network adapter set up to "Obtain an IP Address
Automatically"?  To check this:

- Click on My Computer, then Control Panel, then Network.

- Highlight the line with TCP/IP->(Ethernet adapter's name) and click on Properties.

- Select the IP Address tab in the following window. "Obtain an IP address automatically" should be selected.

2. Is the DHCP server up and running?
If there was any interruption in DHCP service, and the Windows
system was restarted during that time, then incorrect information
understandably can be assigned to the adapter.  Assuming that the
DHCP server has properly started, a quick solution to incorrect
information in winipcfg is to click "Release", followed by "Renew".

If the incorrect information persists, then the Address Allocation pools at the server will have to be investigated, as well as other basic networking issues which might affect the DHCP broadcast.

From the Xinuos technical article database, record 110615. Reproduced with permission. The original is at www.sco.com/ta/110615, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.