Technical article 105741

My OpenServer installation fails with "Warning no controller response on SCSI adapter..."

OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

During what appears to be a successful installation of my SCO OpenServer system, I get the message:

Please wait while your scsi disks are configured into the kernel Warning: no controller response on scsi adapter ha=0 id=0 lun=0

You may see this message repeat for several id's (perhaps 0-6),
even though you may not have devices at some of the id's.  The
LUN may show 1 for the id's that actually have devices.  For
example, if you have a CD-ROM at id=3 the message would look
like:

Warning: no controller response on scsi adapter ha=0 id=3 lun=1

Cause

OpenServer Release 5.0.4  added scanning features that did not
exist in previous releases, which cause installation problems
in some instances.  Earlier releases, therefore, may install
successfully with the identical hardware configuration.

Solution

Add scsi.noscan to your bootstring, which will prevent scanning for additional SCSI harddrives.

From the Xinuos technical article database, record 105741. Reproduced with permission. The original is at www.sco.com/ta/105741, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.