Technical article 107662

My pop3 client fails to connect to my pop server.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

My pop client fails to connect to my pop server.  telnet to
port 110 on the server fails with "Connection refused".

Cause

The official port number specified in RFC 1081 for pop
version 3 is port 110.  However, some pop3 clients attempt
to contact the server at port 109, the pop2 port.

Solution

Unless you are running both pop2 and pop3 servers, you can define both ports for use by the POP3 server by editing /etc/services and /etc/inetd.conf:

/etc/services entries
---------------------
pop3            110/tcp         postoffice
pop2            109/tcp         postoffice
pop             110/tcp         postoffice
/etc/inetd.conf entries
-----------------------
pop3   stream  tcp     nowait  root    /local/bin/popper popper -s
pop2   stream  tcp     nowait  root    /local/bin/popper popper -s

See also

TA107553, "Where can I get a POP2 or POP3 server for SCO UNIX?"

TA107559, "I cannot get connected to the POP3 server on tcp port 110"

From the Xinuos technical article database, record 107662. Reproduced with permission. The original is at www.sco.com/ta/107662, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.