Problem
I added a printer through Printer Manager using lpd and then used
the /usr/lib/lpfilter command to create a filter specific to the
format I need to print with. lpfilter did update the
/usr/spool/lp/admins/lp/filter.table file.I then edited /etc/printcap and added a line to specify using the filter I created, according to the manual page on printcap.
However, when I print, the printjob completes but my filter options are not implemented.
Cause
The man page on printcap(SFF), on how to specify the use of print filters, is incomplete.
Solution
This problem has been reported to SCO Engineering.
See also
Manual pages: lpfilter(ADM), lpadmin(ADM), lp(C), lpd(ADMN),
printcap(SFF)