Technical article 107623

My token ring fails or hangs on Openserver Release 5.0.x.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

My token ring network appears to hang after awhile.

Solution

If you have SCO OpenServer Release 5.0.0b, apply these three supplements, in this sequence:

1. Release Supplement 5.0.0d
   ftp.sco.com/Supplements/rs500d/*
2. Networking Supplement 1.0
   ftp.sco.com/Supplements/net100/*
3. Advanced Hardware Supplement 5.2
   ftp.sco.com/AHS/5.0/sco/5.2/*

If you have SCO OpenServer Release 5.0.2, apply the Advanced Hardware Supplement (AHS) Release 5.2 for the IBM token ring driver.

Note: Communication to AS/400 with an IBM Auto 16/4 token-ring card requires this supplement.

From the Xinuos technical article database, record 107623. Reproduced with permission. The original is at www.sco.com/ta/107623, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.