Technical article 118346

Ncheck is failing with: "ncheck: read error <LARGE_NUMBER>".

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

Running ncheck on a filesystem is failing with the following error message:

ncheck: read error <LARGE_NUMBER>

ncheck fails to produce any output, only this error message. It will work fine on some filesystems, but fail on others.

Cause

The cause of this problem is ncheck fails to read very large
directories properly.  Directories with over 10,000 files may cause
this problem.

Solution

This problem has been reported to SCO Engineering.

From the Xinuos technical article database, record 118346. Reproduced with permission. The original is at www.sco.com/ta/118346, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.