Problem
When the eighth SCO Gateway for NetWare user attempts to log in to the NetWare server, this error message is displayed:
You cannot connect to server <NetWare-Server>The NetWare license supports more than eight users.
Solution
By default, SCO Gateway for NetWare is configured to allow
eight users to log in to the NetWare server. This limit is
configured using the kernel tuneable parameter NUCUSERS,
NUCLOGINS, and NUCNWMPOPENS. The value of all of these must be
greater than the maximum number of users who will concurrently
require access to NetWare resources.
Tuneable parameters which are changed from the default are
defined in the file:/etc/conf/cf.d/stuneIf a parameter is not defined in this file, the default
value defined in /etc/conf/cf.d/mtune is used.In order to increase the value of NUCUSERS from 8 to 32, you will need to be logged into your system as root and execute these commands:
# cd /etc/conf/bin
# ./idtune NUCUSERS 32The system will respond with:Tuneable Parameter "NUCUSERS" is currently set to 8. Is it OK to change it to 32 ? (y/n)
Similar idtune commands should be issued for the NUCNWMPOPENS and
NUCLOGINS parameters. In addition, if these parameters are being
set to values greater than 23, the number of ipx sockets configured
must also be increased. Do this by editing/etc/conf/pack.d/ipx/ipx_tune.hfind the line#define IPX_MAX_SOCKETS 100Change this to a value of 4*(NUCLOGINS+2), i.e. 136 for the example of 32 NUCLOGINS. The kernel must be rebuilt, and the system rebooted for these changes to take effect:
# cd /etc/conf/cf.d
# ./link_unix -y
# shutdown -y -g0 See also
See the stune(F), mtune(F) and idtune(ADM) manual
pages for further details.