Problem
After installing Release Supplement 504C on SCO OpenServer 5.0.4 there are no login prompts (getty processes) displayed on the multiscreens. The graphical login screen is working as normal.
This problem has been seen when the Release Supplement 504C is installed on a system which also has the AMI MegaRAID AMIRD third party driver package installed. See below for details of other RAID controllers which may also result in this problem.
Cause
The way in which the system logs information when booting to
multiuser mode has been modified slightly with the Release
Supplement 504C. The AMIRD driver package installs a startup
script in /etc/idrc.d which is run by the /etc/rc2 shell script
when booting to multiuser mode. This script then executes the
/etc/amirdmon binary. The AMIRD program together with the new
logging method results in the above problem. Solution
This problem is resolved in Support Level Supplement (SLS) OSS497 and Release Supplment 505A (rs505a) for SCO OpenServer Release 5.0.5. For OpenServer 5.0.4 systems, the procedure below should work around the problem.
Edit the /etc/rc2 script and modify the following line so the "$LOGCMD" string is commented out with a hash character (#) as shown:
if [ -d /etc/idrc.d ]
then
for f in /etc/idrc.d/*
{
if [ -s ${f} ]
then
/bin/sh ${f}
fi
} 2>&1 | $LOGCMDTo:if [ -d /etc/idrc.d ]
then
for f in /etc/idrc.d/*
{
if [ -s ${f} ]
then
/bin/sh ${f}
fi
} 2>&1 # | $LOGCMDSave the file and reboot the system. The login prompts should now appear as normal.
NOTE: Currently, this problem has been seen with the AMI MegaRAID Ultra
PCI AMIRD driver package Release 1.42, the HP NetRAID, and the
Mylex RAID controllers, when used with the Release Supplement
504C. See also
Manual page: rc2(ADM)