Technical article 105229

On Compaq LTE notebook, I get an unreadable video display during installation.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

When I install SCO Open Server 3.0 or SCO OpenServer Release 5 on the Compaq LTE notebook computer, I get an illegible garbled video screen.

Solution

This is an BIOS configuration problem, which can be solved by stopping the installation and doing the following:

1. Reboot and press <F10> to enter setup mode.

2. Highlight "Exit".
3. Choose "Restore Factory Defaults".

4. Restart the SCO UNIX System V/386 installation.

From the Xinuos technical article database, record 105229. Reproduced with permission. The original is at www.sco.com/ta/105229, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.