Technical article 105691

On OpenServer 5.0.4 utilities such as cu and uucico do not support high speeds.

OpenServer 5.0.4

Written · Last revised

Problem

UUCP was configured for serial speeds greater than 38400 but it
is not working.  cu(C) exits immediately, and uucico(ADM) gives
the error:
ASSERT ERROR (uucico)  pid: 21526 (7/3-15:42:49) BAD SPEED  (-1) [FILE: line.c,
LINE: 115]
exit code -1
Conversation Complete: Status FAILED

Other binaries affected are 'ct' and 'uuchat'.

Solution

This problem has been resolved in SCO OpenServer Release Supplement 5.0.4C (RS504C).

From the Xinuos technical article database, record 105691. Reproduced with permission. The original is at www.sco.com/ta/105691, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.