Technical article 112081

On Openserver 5.0.5, canceling out of a PPP configuration causes the GUI SCOAdmin Network Configuration Manager to hang.

OpenServer 5.0.5

Written · Last revised

Problem

From the graphical desktop, if you choose:

System Administration -> Networks -> Network Configuration Manager
and then select:
Hardware -> Add New WAN Connection
and then select:

"SCO TCP/IP PPP driver" -> Continue "SCO TCP/IP" -> Add

you are presented with the "PPP Connection Type" menu. If you select "Cancel" from this menu, the SCOadmin Network Configuration Manager will hang.

Solution

This has been reported to SCO Engineering and has been fixed in SCO OpenServer 5.0.6.

To stop the Manager from hanging, you will need to manually kill the process that is hanging. Use the following to find the process ID (PID) of the hung process:

# ps -ef | grep ncfg | grep pop

This should return something similar to the following:

root   831   824  0 15:42:58       ?    00:00:00 /opt/K/SCO/lli/5.0.5a/ncfg/
bin/pop -X -T Configure networking product -L /tmp/n

In this example, the PID is 831. Next, run the following as root:

# kill 831

At this point, you can exit the Network Configuration Manager. If you then reenter the Manager, you will see an entry for the "SCO TCP/IP PPP driver" which can be configured or removed.

NOTE:     This does not occur when running the Network Configuation Manager
          (netconfig) in a non-graphical (CHARM) session.

From the Xinuos technical article database, record 112081. Reproduced with permission. The original is at www.sco.com/ta/112081, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.