Technical article 105959

On shutdown, I get an error similar to "Could not open var/opt/K/SCO/lli/5.0.2k/dlpidPIPE".

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

I get this error, or one similar to it, on shutdown:

Could not open var/opt/K/SCO/lli/5.0.2k/dlpidPIPE

Cause

This type of error can occur after a questionable network card driver has been linked into the kernel.

Solution

To avoid this error, dlpidPIPE has to be re-created. To do this, take these steps:

# cd /var/opt/K/SCO/lli/5.0.0l

(or /var/opt/K/SCO/lli/5.0.2k for SCO OpenServer 5.0.2; /var/opt/K/SCO/lli/5.0.4d for SCO OpenServer 5.0.4).

# mknod dlpidPIPE c 60 0
# chmod 666 dlpidPIPE
# chown root dlpidPIPE
# chgrp root dlpidPIPE

See also

dlpid(ADM)

From the Xinuos technical article database, record 105959. Reproduced with permission. The original is at www.sco.com/ta/105959, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.