Technical article 105670

Only 1 CPU is recognized after installing SCO SMP on a Siemens Nixdorf Primergy APIC multiprocessor machine.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

Sometimes only one CPU is recognized after installing and licensing SCO SMP on a Siemens Nixdorf Primergy APIC multiprocessor machine.

Cause

This may be due to the snipce driver preventing the APIC driver from being recognized. The snipce driver is part of the Generic Platform Interface (GPI) for older SNI Siemens Nixdorf machines. Sometimes, the SMP hardware test routine erroneously deduces that the machine requires the snipce GPI and activates it, instead of the APIC GPI.

Solution

Edit the file:
/etc/conf/sdevice.d/snipce

Examine the second field. If this field contains a 'Y', change it to an 'N' and save the file.

Now examine this file:
/etc/conf/sdevice.d/apic.

Ensure that the second column in this file contains a 'Y'. If it contains an 'N', edit the file and change it to a 'Y'.

Relink the SCO UNIX kernel and reboot the system:

cd /etc/conf/cf.d
./link_unix -y
reboot

The second CPU should now be recognized.

From the Xinuos technical article database, record 105670. Reproduced with permission. The original is at www.sco.com/ta/105670, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.