Problem
After configuring a remote UUCP dialup printer (as per Chapter 4 of the "System Administrator's Guide"), only one or two print jobs are printed. Additional jobs remain in the queue without being printed.
If the modem on the local system is switched off and then on, another one or two jobs may be printed, but the problem reoccurs.
Cause
This is usually caused by the modem dialer not initializing the modem correctly, and has been seen when configuring the system to use an entry in:
/usr/lib/uucp/Dialers Solution
Do not use a Dialers(F) entry for the modem, even though the documentation states you should do this. Instead, configure the system to use atdialer(C).
For example, on a system with a US Robotics Courier Dual Standard V.34 modem attached to COM1:
1. Log in as the root user, use disable(C) to disable the printer, and then switch off the modem.
2. Create a symbolic link in /usr/lib/uucp to the atdialer(C) binary. This should have the same name as that of the defaults file for your modem in /usr/lib/uucp/default, as follows:
cd /usr/lib/uucp
ln -s /opt/K/SCO/Unix/5.0.5Eb/usr/lib/uucp/atdialer
Courier_Dual_Standard_V-34_Fax3. Edit /usr/lib/uucp/Devices and replace the entry for tty1A:
ACU tty1A - 9600 hayes2400 \Twith:ACU tty1A - 9600 Courier_Dual_Standard_V-34_Fax \T4. Switch on the modem, and use enable(C) to enable the printer.
If you don't have an entry in /usr/lib/uucp/default for the modem you are using, you can use make.dialer in conjunction with your modem's manual to create one. See /usr/lib/uucp/README.DIAL for more information.
See also
The manual pages for Dialers(F), atdialer(C), disable(C), and
enable(C)