Technical article 115423

OpenServer 5.0.6 double panics with trap type 0x0000000E during user login.

OpenServer 5.0.6

Written · Last revised

Problem

OpenServer 5.0.6 (with Release Supplement 5.0.6a installed) double panics with trap E during a user login. A message similar to:

PANIC: License data corruption - LB(978) already set
is displayed.

Solution

This problem is caused by license corruption, which can occasionally occur. The problem has been reported to SCO Engineering.

In order to work around the problem, please take the following steps:

1. Run "scoadmin license" as the root user 2. Remove all of the user licenses 3. Re-add the user licenses 4. Reboot the system

If the system panics while you are attempting the work around, please try restarting the machine with a bootstring of "defbootstr ksl.disable"; booting into maintenance (single-user) mode and then running "scoadmin license".

See also

ta104755 ""No user licenses were found on this machine" error and system panics."

ta114584 "How do I change a license number information after installation time?"

From the Xinuos technical article database, record 115423. Reproduced with permission. The original is at www.sco.com/ta/115423, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.