Problem
Attempting to install software through the SCOadmin software manager, or custom, is failing with:
SSO_REMOVAL_BEGIN_PATCHED_COMPONENT not in current contextThe software is not installed and subsequent attempts fail with the same error message.
Cause
The software that is attempting to be installed is corrupted somehow
and, thus, the software manager cannot decipher what it is. Even if
the software is removed and downloaded once again, the Software
Manager will assume the package is still corrupt and will display the
above error message. Solution
The corrupted software must first be removed from the system. A
common cause for this is FTP transfer of software in ASCII mode. If
this is the case, please specify 'bin' at the ftp> prompt prior to
downloading/uploading the software to the OpenServer system.A software verfiy of the system must be performed to properly isntall the software in question. This can be done through the SCOadmin Software Manager, or custom.
It is advised to be in single user mode prior to repairing the software. Start the SCOadmin Software Manager. From the main screen, select the software menu -> verify system -> Normal System State (thorough).
After this operation is complete, the software should be able to be installed as normal.
See also
ta105411, "Filesystem Repair Utilities for SCO OpenServer 5.0.0,
5.0.2, 5.0.4, 5.0.5."