Technical article 105895

OpenServer 5 network-capable boot diskette fails with error "slink: can't open '/etc/strcf'."

OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

I have followed the procedure in the SCO OpenServer 5.0.4 Handbook, Chapter 5, entitled "Creating an emergency boot floppy disk set" and added the listed files to make a network-capable boot set so I can use rlogin(TC) and ftp(TC) to connect out to other systems. However, when I reboot and get to the "#" prompt and run the command:

# tcp start
it displays these errors:
slink: can't open "/etc/strcf"
ifconfig: /etc/default/inet: No such file or directory
/etc/tcp: hostname: not found
ifconfig: open: No such device or address
ifconfig: open: No such device or address
/etc/tcp: strerr: not found
/etc/tcp: kill: not found
/etc/tcp: dspmsg: not found

Solution

The suggested functionality of network-enabled boot diskettes contained in the SCO OpenServer Release 5.0.4 and 5.0.5 documentation was not implemented.

See also

scohelp(XC) for details of the SCO OpenServer Handbook.

From the Xinuos technical article database, record 105895. Reproduced with permission. The original is at www.sco.com/ta/105895, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.