Technical article 105814

OpenServer 5, Virtual Disk Manager (VDM) reports that a disk has bad parity, is offline, or disabled.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

During bootup or normal system operation, I see a warning about
one of my virtual disks.  The error will be something like:

vdiskX: is being taken offline vdiskX: piece Y is being taken out of service vdiskX: parity out of date vdiskX: failed to read timestamp

where vdiskX refers to a specific virtual disk.

Cause

These messages are usually caused by:

- improper shutdown/reboot - filesystem corruption - physical disk errors - device timeouts - virtual disk taken offline manually

There may be other causes as well.

Solution

Use the disk maintenance and repair options from the Virtual
Disk Manager in scoadmin.  Go into SCOadmin and choose
Filesystems --> Virtual Disk Manager.  Then, take these steps:

1. Select the vdisk with the error message.

2. From the the main menu, choose:

Disk --> Disable Disk --> Maintenance --> Repair Disk --> Enable Disk --> Force Online

Or, you can try to manually repair the array and force it back online with the following commands (may be issued in sequence or individually):

/etc/dkconfig -h /dev/dsk/vdiskX /etc/dkconfig -d /dev/dsk/vdiskX /etc/dkconfig -r /dev/dsk/vdiskX /etc/dkconfig -cf /dev/dsk/vdiskX /etc/dkconfig -e /dev/dsk/vdiskX /etc/dkconfig -v /dev/dsk/vdiskX

See the man page of "dkconfig" to see exactly what option does what.

It is recommended that you be in Single-User Mode when running the above commands.

If this procedure doesn't work, contact your support provider or check /usr/adm/syslog to see if there are any message relating to faulty hardware.

See also

oss602b:  Virtual Disk Manager Supplement

From the Xinuos technical article database, record 105814. Reproduced with permission. The original is at www.sco.com/ta/105814, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.