Technical article 105766

Outgoing MMDF mail sent from Fineline Message Manager leaves system with incorrect address.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

Outgoing MMDF mail sent from the command line works fine; incoming
mail works fine.  Outgoing mail sent from the mail user agent
"Fineline Message Manager" appears to be sent, but the message is
never received on the remote system.

Cause

There is a bad address being prepended to the destination address. If you were to set MMDF logging to "FTR", you would see bad address error messages in the chan.log and msg.log files.

Solution

Check the file /appl/bin/mm/config/SYSTEM for a variable MMPREFIXML.
This variable should be set to "", so that nothing is prepended
to the outgoing mail address.  In other words, make sure the line
reads:
MMPREFIXML=""

and the mail sent from the application should work.

See also

mmdftailor(F) manual page for information on MMDF debugging.

From the Xinuos technical article database, record 105766. Reproduced with permission. The original is at www.sco.com/ta/105766, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.