Problem
I am trying to connect to a remote site via Morning Star PPP using an ISDN modem. I am using the ISA-64 or ISA-56 dialer from the /usr/lib/mstppp/Dialers file. Both cu(C) and uutry(ADM) work successfully to this site. However, when using an outgoing Morning Star PPP connection, the /usr/adm/pppd.log file shows a failure to connect. The relevant part of this file looks like this:
send (ATD123456789^M)
expect (TIMOUT)
^M
ATD123456789^M^M
CONNECT 115200/V120 64000/LAPD^M
timeout
-- read timed out
tty_close() (2)
Dial failed
Call to xxx.xxx.xxx.xxx failed (Dial failed) Solution
Edit the file /usr/lib/mstppp/Dialers and locate the ISA-64 or ISA-56 entry. Change the word "TIMOUT" to "TIMEOUT".
This problem is scheduled to be addressed in a future release of SCO OpenServer 5.
NOTE: If using the Hayes Accura TA ISDN modem, Hayes recommends you
remove the initialization string AT%a1=0%a2=2%a4=0%a0=2 and
replace it with ATB20.Here is an example Dialer entry for the ISA-64 that has been reported to work:
# Hayes ISDN System Adapter using V.120 rate adaptation
#
# Use ISA-64 for calls using 64k Bearer Capability (%a4=0)
ISA-64 ABORT ERROR ABORT NO\sCARRIER ABORT RRING\r\nRRING\r\nRRING \
TIMEOUT 5 "" AT&F OK-ATQ0-OK ATB20 OK-AT-OK \
ATS01=1&c1&d2&k3 OK-AT-OK ATD\T TIMEOUT 60 CONNECT