Technical article 107711

panic trap 0x000000 with SLS OSS449F Network Maintenance Supplement installed.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

In rare cases, a system with Support Level Supplement (SLS) OSS449F, the Network Maintenance Supplement, may panic with a trap type 0 (panic trap 0x000000).

If the value of the inconfig-tunable ip_spinreport is 0, and if this kernel warning message is printed:

WARNING: ip: spinning on queue for on PCB Fxxxxxxx

then the kernel will panic with a divide-by-zero error.

This problem is unique to SLS OSS449F.

NOTE:     The "ip: spinning on queue for on PCB Fxxxxxxx" warning is different
          from the "ip: spinning on PCB Fxxxxxxx" warning, and less frequently
          encountered.

Solution

This can be quickly and permanently resolved by issuing this command while logged in as "root":

# inconfig ip_spinreport 5000000

Setting ip_spinreport to a non-zero value guarantees that a divide-by-zero panic caused by ip_spinreport cannot occur.

It is not necessary to relink the kernel or reboot the system.

From the Xinuos technical article database, record 107711. Reproduced with permission. The original is at www.sco.com/ta/107711, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.