Technical article 100081

Panic when going multiuser on systems with alad driver.

OpenServer 5.0.0OpenServer 5.0.4

Written · Last revised

Problem

Entering multiuser mode on a system on which ARCserve/Open or ARCserve/Open Lite, SMP, and the 5.0.4 alad driver have been installed causes a panic. A stack trace shows the following:

dontown(F028B318)                       <-cheyioctl+255
cheyioctl(? 4700, 0, 8047C30, 7)        <-devfs_ioctl+98
devfs_ioctl(FB8FB660, 0, 8047C30, 7)    <-ioctl+62
ioctl(? 807F79C, 80400024, 2, 1)        <-systrap+1C8
systrap(E0000E1C)                       <-scall_nokentry+14

Cause

A conflict between ARCserve and the alad driver occurs when the /etc/rc2.d/S90ARCserve script is run.

Solution

Follow these steps to install the AHS 5.2 version of the alad driver while in single-user mode, where the mount command refers to the SCO OpenServer 5.0.4 CD-ROM:

mount /dev/cd0 /mnt
cd /etc/conf/pack.d/alad
mv Driver.o Driver.o.orig
mv space.c space.c.orig
cp /mnt/images/alad/Driver.o .
cp /mnt/images/alad/space.c .
cd /etc/conf/cf.d
./link_unix -y
umount /mnt
reboot

From the Xinuos technical article database, record 100081. Reproduced with permission. The original is at www.sco.com/ta/100081, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.