Technical article 104800

Part of my total disk space is missing after configuring a RAID array

OpenServer 5.0.0

Written · Last revised

Problem

I have configured a RAID 4 and/or RAID 5 virtual disk. The total available disk space is less than I expected.

Cause

RAID levels 4 and 5 use part of the total disk space for
storing parity data.  Parity data is the redundancy (or
error-correction) information generated during writes,
and is necessary in these virtual disk types for data
integrity.

Solution

The disk space used by parity is equal to 1/n, where n is
the number of disks in the array.  Therefore, an array with
five disks will "lose" 1/5 of the space available to store
parity information.  Likewise, an array with 10 disks will
"lose" 1/10 of the space for parity.

See also

See other articles in this database for more information on configuring and using the Virtual Disk Manager product.

From the Xinuos technical article database, record 104800. Reproduced with permission. The original is at www.sco.com/ta/104800, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.