Technical article 107636

PPP no longer works after aliasing a network interface.

OpenServer 5.0.0

Written · Last revised

Problem

PPP can fail when IP aliasing is used. Errors similar to the following may be seen in the /usr/adm/syslog file:

Oct 1 07:29:12 sco1 pppd[295]: SIOCGIFALL fail Oct 1 07:29:12 sco1 pppd[295]: getifall fail Oct 1 07:29:12 sco1 pppd[295]: getppphostent for '*a200657': bad address pooling specification

Cause

This is due to a problem which prevents incoming PPP connections from being routed correctly to the aliased interfaces.

Solution

The SCO Networking Supplement 1.0.0 resolves the above problem. The supplement can be downloaded from the following location:

https://ftp.scoexpert.com/Supplements/net100
NOTE:     The SCO OpenServer Release Supplement 5.0.0d must be applied to the
          system before applying the SCO Networking Supplement 1.0. The
          Release Supplement can be downloaded from the following location:
https://ftp.scoexpert.com/Supplements/rs500d

See also

ifconfig(ADMN)

From the Xinuos technical article database, record 107636. Reproduced with permission. The original is at www.sco.com/ta/107636, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.