Technical article 105154

Problem with HP SureStore 6000 DAT drive and Sybase backup under SCO OpenServer.

OpenServer 5.0.0

Written · Last revised

Problem

When using an HP SureStore 6000 DAT drive under SCO OpenServer with the Sybase database and Sybase backup, you may run into problems reading/writing multiple files/volumes on a single DAT tape. For example, if you access the 5th file/volume, it works, but if you then attempt to access any file that has a filemark under 5 (such as filemark 2) the information from the tape is garbled. Or, if you attempt to read the 2nd file again, the 3rd file will actually be read.

Solution

1. Make sure you have applied Release Supplement 5.0.0d; Release Supplement 5.0.0d supersedes Support Level Supplement (SLS) OSS404A which was a SCSI tape file mark supplement.

2. Apply SLS OSS422A.

3. Obtain this supplement from Sybase and install it on your system:

EBF 3472

From the Xinuos technical article database, record 105154. Reproduced with permission. The original is at www.sco.com/ta/105154, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.