Technical article 104967

Relink fails after installing AHS 5.X over DPT supplied drivers.

OpenServer 5.0.0

Written · Last revised

Problem

I have installed my computer using a Boot Time Loadable
Driver (BTLD) supplied by DPT.  When I attempt to install
the Advanced Hardware Supplement (AHS) Release 5.1 or later,
the kernel relink fails.

The error messages that occur are similar to:

/etc/conf/bin/idmknod: Driver dptr is not a character special device

I am unable to rebuild the kernel environment after this point.

Solution

The DPT driver, installed by using installpkg, has different device characteristics than the driver supplied by SCO.

When the driver is partially overwritten by the AHS 5.X, the resulting combination will not build properly, causing a link failure.

It is recommended that you do not install non-SCO drivers before installing SCO products, particularly if the driver replaces or is replaced by an SCO driver, as in this case.

It may be possible to remove the DPT driver, install the Advanced Hardware Supplement, and then reinstall the DPT driver.

To remove the DPT driver, issue the command "removepkg"
while logged in as root.  Select the DPT driver package.

If this fails, it will be necessary to reinstall the system, waiting until after the AHS is installed to install the DPT software.

From the Xinuos technical article database, record 104967. Reproduced with permission. The original is at www.sco.com/ta/104967, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.