Problem
After upgrading to SCO OpenServer 5, telnet and X Windows sessions from systems other than those on the local network have started to hang when large amounts of data are sent, such as a login banner.
Cause
SCO TCP/IP now implements Path MTU Discovery by default as specified
by the RFC 1191. This results in the 'Don't Fragment' bit being set
in the IP header. If the minimum MTU size supported for a particular
route is too small for the packet to be delivered, an ICMP error
packet will be returned. SCO TCP/IP does not always react to the
ICMP error and retransmits the packet unchanged. Solution
This problem has been reported to SCO Engineering.
The TCP/IP Path MTU Discovery can be disabled by altering the value of the 'ip_perform_pmtu' parameter contained in the file "/etc/default/inet". The default setting is 1 - enabled. Use the inconfig(ADMN) command to modify the file.
The current setting for the 'ip_perform_pmtu' parameter can be found using:
# inconfig ip_perform_pmtu
inconfig: symbol ip_perform_pmtu has current value 1, minimum 0,
maximum 1Modify the setting in order to disable Path MTU Discovery:
# inconfig ip_perform_pmtu 0Check the setting:# inconfig ip_perform_pmtu
inconfig: symbol ip_perform_pmtu has current value 0, minimum 0,
maximum 1Restart your system. The '/etc/inconfig' utility is invoked by the "/etc/rc2.d/S85tcp" startup file when the system enters multiuser mode.
See also
RFC 1191 J. Mogul, S. Deering, "Path MTU Discovery", 11/16/1990 for a concise description of the mechanism used to implement this enhancement.