Technical article 102445

Resetting the number of NFS connections to 256 fails.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I initially set the number of NFS connections on my system to 1024. Later, I wanted to reset it to the default number of 256. When I used the scoadmin(ADM) Network Configuration Utility to switch the value back to 256, on relink and reboot of the system, I discovered that the value had been set to 768 rather than 256. It had only reduced the value of 1024 by 256, not reset it to 256.

The number of NFS connections, which is the number of rnodes that NFS will support, sets the variable NFSD_UNITS in the file "/etc/ conf/ cf.d/config.h" on kernel rebuild. This had been set to 768. This value was also set in the Network Configuration Manager.

This problem has been reported on SCO OpenServer 5.0.2 with Support Level Supplement (SLS) OSS449A installed. It has also been observed on SCO OpenServer Release 5.0.0 installed with the Networking Supplement 1.0.0 and SLS OSS449A.

Solution

This problem has been reported to SCO Engineering. As a workaround, keep resetting and rebuilding the system kernel until the actual value returns correctly to 256.

From the Xinuos technical article database, record 102445. Reproduced with permission. The original is at www.sco.com/ta/102445, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.