Technical article 107690

Routes are mysteriously showing up in my routing tables.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

My system is not running routed, gated, or ird'd, yet my netstat -rn shows new routes. How are they getting there? The netstat -rn output also shows a "D" in the flags section for these routes.

Cause

ICMP-Internet Control Message Protocol added this route because of an ICMP redirect. When a system learns of a route via an ICMP redirect, it adds the route to its routing table, so that additional packets bound for that destination will not need to be redirected. The system uses the D flag to mark these routes.

Solution

An SCO system can prevent the generation of such redirects by disabling the IP sendredirects parameter. There is nothing that can be configured on the SCO box that can prevent it from receiving them. However, and unless it is affecting the functionality of networking, it may not want to. A router may be sending such redirects, for example, to tell a host on the network that there is a better way out through another router or gateway on the same network.

If networking functionality is being affected and these routing table entries must stop, a LAN analyzer may be required if the initiator of such packets is not known. The analyzer has the ability to filter the ICMP packets to ascertain which IP is generating them.

See also

"TCP/IP Network Administration" by Craig Hunt O'Reilly & Associates, Inc.

From the Xinuos technical article database, record 107690. Reproduced with permission. The original is at www.sco.com/ta/107690, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.