Problem
SCO Internet to Netware Gateway Version 2.20 has been loaded on an SCO OpenServer 5.0 system. The IPX/SPX protocol stack has been configured over the system's LAN via netconfig(ADM). On startup, the following error appears:
Inetix Gateway - version 2.2.0SYSTEM ERROR: Error opening IPX device errno=6 (no such device or address) inetix [main.c, 735]
The SCO Internet to Netware Gateway (Inetix Gateway from MCS Inc.) product is started from the "/etc/rc2.d/S87mcs" script. The error may be reproduced by running:
# cd /etc/rc2.d
# ./S87mcs startA log is also kept in the file "/etc/mcsnet/mcs.log". This records:
Inetix Gateway
pid: 4710 Fri May 23 16:36:50 1997
USER ERROR: Start failed. Gateway password not set.
inetix[main.c, 594] Cause
The underlying IPX/SPX protocol has not started or is not currently running on the system. This is started on system boot by the "/etc/rc2.d/S86nps" script.
Solution
Start IPX using:# ipx start
Starting IPX/SPX: npsd sapd nvtdCheck for processes running:#ps -ef |grep npsd...
root 4884 1 0 04:42:49 ? 00:00:00 /etc/npsd
...
root 4882 1 0 04:42:49 ? 00:00:00 /etc/sapd
...
root 4883 1 0 04:42:49 ? 00:00:00 /etc/nvtdStart the SCO Internet gateway:# ./S87mcs startInetix Gateway Version 2.20
(c) Copyright 1995, 1996 Micro Computer Systems, Inc.
All rights reserved.Check the daemon is running:# ps -ef |grep inetixd
root 11717 1 0 11:59:17 ? 00:00:00 /usr/bin/inetixd
started 7 8
root 11718 11717 0 11:59:17 ? 00:00:00 /usr/bin/inetixd
started 7 8The "/etc/mcsnet/mcs.log" still shows the error:USER ERROR: Start failed. Gateway password not set.Set the password using "/usr/bin/mcsadm". Choose:3. Administer MCS Software,1. Inetix Gateway5. Set Password...The gateway may also be administered via the Inetix Gateway Administration (IGA) utility which is installed on a Netware client.