Technical article 105946

SCO OpenServer 5.0.4 SMP on a Compaq ProLiant 6500 reduces processor speed.

OpenServer 5.0.0OpenServer 5.0.4

Written · Last revised

Problem

SMP is installed on an SCO OpenServer system and the system is
rebooted.  The front panel displays 200 MHz as normal. A second
reboot is carried out and from that point on, when the ProLiant
is rebooted it will intermittently display a speed of 133 MHz.
Tuning utilities indicate that the lower displayed processor
speed corresponds to a genuine drop in operating system performance.

Solution

This problem has been reported to Compaq. The current recommended workaround is to continue power-cycling the machine until it comes up at 200 MHz.

From the Xinuos technical article database, record 105946. Reproduced with permission. The original is at www.sco.com/ta/105946, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.