Technical article 109640

SCO OpenServer 5.0.5 installation halts on a 16MB or 32MB system.

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

After specifying a SCSI CD-ROM as the media device for installing SCO OpenServer, the installation halts with the following messages:

Checking system state and loading installation files. Please Wait...

Reading from Install Source: 10 KBWARNING: DTFS: dtnoderead:

inode 141 unknown type on dev ram (31/42)
System error 5:
while exec'ing:
/commonFS/commonUtils/commonUtils
/commonFS/commonUtils/commonUtils exited with status 2
Press  to continue

Or, the installation may fail further on, with these messages:

Please Wait while additional files are extracted from media source.

Extracting files...
Reading from Install Source:
10KB/ramFS/extractProd/extractAll
terminated by signal 8
Press  to continue

SCO OpenServer 5.0.4 installs on the same system without a problem.

Cause

The SCO OpenServer 5.0.5 installation routine requires more RAM
than in previous releases.  Furthermore, the above symptoms are
more likely to occur when actually booting from the OpenServer
CD-ROM.

Solution

Start the installation again from the beginning and enter the following at the Boot: prompt:

defbootstr nbuf=100

This has the effect of temporarily reducing the size of the buffer cache, resulting in more room for installation processes.

From the Xinuos technical article database, record 109640. Reproduced with permission. The original is at www.sco.com/ta/109640, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.