Technical article 109902

SCO OpenServer 5.0.5 won't install on IBM PC Server 310/8639ODT or 6583W5F.

OpenServer 5.0.5

Written · Last revised

Problem

When trying to install SCO OpenServer 5.0.5 on my IBM PC Server 310, the boot from floppy fails at the point of "sizing memory," immediately after the boot options are displayed.

Cause

An E820 BIOS call is issued to check physical RAM in the system. Some machines with older BIOSs are not compatible with this BIOS call.

Solution

A bootstring that specifies the actual memory range:

defbootstr mem=1m-16m, 16m-48m/n/p

has enabled installation on the IBM PC Server 310/8639ODT. Note that this string assumes a 48MB system and should be adjusted as needed for the actual RAM amount in your server.

This string should also be added to the /etc/default/boot file by doing the following:

(1) Boot to single-user mode using the bootstring at the boot prompt. (2) Back up and edit /etc/default/boot. (3) Add the bootstring, minus the word "defbootstr" to the "DEFBOOTSTR=" line. (4) Save changes to /etc/default/boot and reboot.

You may need additional assistance from your support supplier if this method doesn't work.

NOTES:    To test to see if the system is failing the memory scan, type
          mem=/v at the Boot: prompt.  On the aforementioned IBM systems,
          this verbose mode revealed that boot goes into an infinite loop
          on the memory scan.

See also

ta105937, "SCO OpenServer 5.0.4 installation bootstring options."

man bootstring(HW), man mem(HW)

From the Xinuos technical article database, record 109902. Reproduced with permission. The original is at www.sco.com/ta/109902, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.