Technical article 110117

SCO OpenServer 5 stops and waits for <enter> key after the "loading kernel hd(40)unix .bss" message.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

I have installed SCO OpenServer 5. After rebooting my system, it hangs immediately after the message:

loading kernel hd(40)unix .bss
with the following message:
System loaded. Press <Return> to continue:

When I press <Return>, the system boots as normal.

Solution

Switch off the APM (Advanced Power Management) of your system BIOS. At the boot prompt, type:

defbootstr apm.no32pm=disable
NOTES:    Add apm.no32pm=disable to DEFBOOTSTR in the file:
/etc/default/boot

to avoid having to explicitly type the above bootstring every time the system is booted.

See also

Manual pages: boot(F), boot(HW), bootstring(HW), apm(HW)

From the Xinuos technical article database, record 110117. Reproduced with permission. The original is at www.sco.com/ta/110117, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.