Technical article 113461

SCO OpenServer does not recognize the USB bus on my system with the SCO OpenServer USB Supplement installed.

OpenServer 5.0.6

Written · Last revised

Problem

I am trying to use the Universal Serial Bus (USB) on my Compaq system. I have installed the USB Supplement for SCO OpenServer 5 Release 5.0.6 but the kernel does not see the USB bus at boot time.

Cause

The USB Supplement for SCO OpenServer 5 Release 5.0.6 supports Intel and Visa chipsets based on the Universal Host Controller Interface (UHCI) specification.

If your system is not using a UHCI controller then it will not be recognized or supported by the SCO OpenServer USB Supplement.

Some Compaq systems are known to use the OHCI controller interface. These are not supported by the SCO USB supplement.

Solution

The only solution at this time is to use systems that support UHCI or upgrade to a later release of OpenServer5.

From the Xinuos technical article database, record 113461. Reproduced with permission. The original is at www.sco.com/ta/113461, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.