Technical article 109184

SCOAdmin Backup gives error "Failed to retrieve local host device list" when starting.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

After setting the media value I can no longer enter:

scoadmin -> backup

When I try to, the system displays this error:

Failed to retrieve local host device list Cannot continue Backup manager startup

Details displays the following:

Failed to retrieve local host device list Cannot continue Backup manager startup General failure occurred in processing attribute volumeSize An execution procedure has failed with the message: integer value too large to represent while executing.

Cause

An invalid "Volume Size in KBytes" was entered for "Default Media Values". The input for the volume size exceeded the range. The volume size is in KBytes, for example for a tape that has a 2 GB capacity (2,000,000,000), enter 2000000 for the volume size.

Solution

Change directories to:
/var/opt/K/SCO/Unix/<version of operating system>/sa/backup

edit the "media" file and remove the numerical entry for:

volumeSize=

Note: Be sure to leave the "volumeSize=" intact.

You can now enter scoadmin -> backup and set the "Volume Size" to a proper number.

See also

TA105029 "SCOAdmin does not start; there are problems with Backup/Filesystem Managers."

From the Xinuos technical article database, record 109184. Reproduced with permission. The original is at www.sco.com/ta/109184, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.