Problem
How do I configure DHCP on an SCO OpenServer Enterprise 5.0.5 host?
I went to SCOhelp, and in the Networking Guide Chapter 7, on
Configuring a Dynamic Host Configuration (DHCP) Server, I followed
the link labeled "For More About DHCP". This Help page says:To obtain more information about DHCP, see the following manual pages:
-------------------------------------------------------------------------------
Manual page Information provided
-------------------------------------------------------------------------------
aasd(ADMN) Address Allocation Server daemon
aasd.conf(SFF) Address Allocation Server daemon configuration file
bootpd(ADMN) Internet Bootstrap Protocol server daemon
bootpgw(ADMN) Internet Bootstrap Protocol gateway daemon
dhcpd(ADMN) Dynamic Host Configuration Protocol daemon
dhcpd.conf(SFF) Dynamic Host Configuration Protocol daemon configuration fileHowever, there are only links to the man pages on bootpd and
bootpgw. There are no links to the pages on aasd, aasd.conf,
dhcpd, or dhcpd.conf. Furthermore, when I use "man" at the
command line, I find that there is no page for these topics. Solution
This problem is resolved in SCO OpenServer Release 5.0.6.
For earlier releases, the UnixWare 7 man pages for these topics
may be used instead, as the configuration files are the same
for the two operating systems. In case a UnixWare 7 server is
not available, these pages have been provided in two separate
Technical Articles: one for aasd and aasd.conf; one for dhcpd
and dhcpd.conf.These man pages may also be viewed on the World Wide Web from:
http://uw7doc.sco.com See also
ta110031, "Documentation for aasd configuration under SCO OpenServer 5.0.5."
ta110032, "Documentation for dhcpd configuration under SCO OpenServer 5.0.5."