Technical article 110029

SCOhelp section on setting up DNS for SCO OpenServer 5.0.5 refers to nonexistent files.

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

In SCOhelp for OpenServer 5.0.5, Networking Guide, Chapter 6, Configuring the Domain Name Service, I go to the section on Basic DNS Configuration. This section says:

Edit the appropriate configuration file to perform basic DNS configuration.
In some cases, template files are available. The files are:
 ------------------------------------------------------------------
 Server type    Filename           Template           Refer to
 ------------------------------------------------------------------
 caching-only   /etc/named.boot    /etc/named.b.ca    caching
 primary        /etc/named.boot    /etc/named.b.pri   primary
 secondary      /etc/named.boot    /etc/named.b.sec   secondary
 remote         /etc/resolv.conf   (none)             client
However, when I list the contents of the /etc/name*, none
of these files are there.  Where are the template files?

Cause

Version 8.1 of BIND is included in SCO OpenServer 5.0.5. This new
version of BIND does not make use of /etc/named.boot; it uses the
file /etc/named.conf instead.  SCOhelp has not been updated to
reflect this change.

Solution

The appropriate template files for building your /etc/named.conf
can be found in /etc/named.d.  There is also an extensive README
in /etc/named.d, explaining the changes in depth.

From the Xinuos technical article database, record 110029. Reproduced with permission. The original is at www.sco.com/ta/110029, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.