Technical article 109341

Screen hangs when configuring a modem in the character screen.

OpenServer 5.0.4

Written · Last revised

Problem

After exiting from configuring a modem in a character screen using "scoadmin->hardware/kernel manager->modem manager" the screen hangs immediately after the message "Press <Enter> to continue."

          I change screens and kill the process that executes "/etc/mkdev
modem".
          When I go back to where I was working on configuring the
          modem, I see this error message:

The command "/etc/mkdev modem" did not complete successfully.

I choose OK and am returned to the Hardware/Kernel Manager screen
where I am able to exit successfully.  I then go back to
scoadmin->hardware/kernel manager->modem manager to see if the
modem is configured. The modem is there and the configuration
files have been edited.

The same thing occurs when I delete the modem.

Solution

This problem will be fixed in a future release of Openserver 5.

To work around this, use the GUI interface. Or, on a character screen, use the command "scoadmin modem manager".

See also

Online help for the Modem Manager Interface, Installing a Modem.

ta105819, "mkdev serial hangs looking for a second serial port."

ta105659, "I cannot autodetect my modem using the SCOAdmin Modem Manager GUI on OSR 5.0.4."

From the Xinuos technical article database, record 109341. Reproduced with permission. The original is at www.sco.com/ta/109341, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.