Technical article 105630

SMC EtherPower 9432 10/100MBs network adapter does not function properly.

OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

The SMC EtherPower 9432 10/100MBs network adapter does not function properly in SCO OpenServer Release 5.0.4 and 5.0.5. It corrupts data and stops functioning when a load is placed on the adapter.

Cause

          Defective driver software was inadvertently included
with SCO OpenServer
          Release 5.0.4.  A driver for this adapter was not included at all
          in OpenServer Release 5.0.5.

Solution

          A new, fixed driver for the SMC EtherPower 9432
10/100MBs network adapter
          is now available on the SCO ftp download site for both SCO
          OpenServer Release 5.0.4 and 5.0.5.  You can download the
          5.0.5 driver at
https://ftp.scoexpert.com/drivers/OSR505/network/spwr
and the 5.0.4 driver at
ftp:// ftp.sco.com/pub/drivers/OSR504/network/spwr

From the Xinuos technical article database, record 105630. Reproduced with permission. The original is at www.sco.com/ta/105630, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.