Problem
There are several separate concerns that you should be aware of
when applying Support Level Supplement (SLS) OSS601A, the Year 2000
Supplement for SCO OpenServer Release 5.0.2 and 5.0.4, to your
system. These concerns are fully described below.NOTE: Please read the cover letter for SLS OSS601A thoroughly before
installing OSS601A. The issues covered below are discussed in the
cover letter briefly wherever they logically occur within the
install/removal procedures. The present technical article is
provided as a convenient isolated listing and more thorough
description of these issues. The cover letter is contained in
TA110077, "What is addressed by SLS OSS601A, the Year 2000
Supplement for SCO OpenServer 5.0.2 and 5.0.4?" Solution
There are several distinct known issues which should be fully
understood when applying SLS OSS601A to your system. In summary,
these are:1. Order of installation issues with several other Support Level Supplements (SLSs) and Release Supplement RS504C
2. Order of installation issues with both the OpenServer Development System and the UnixWare/OpenServer Development Kit (UDK)
3. The need to reboot your system for the date and time fixes to fully take effect
4. Custom(ADM) verification errors that may occur during installation of the supplement
5. The possibility of special problems if you choose to "Load" SLS OSS601A before you "Apply" it on OpenServer 5.0.2
6. The need to rebuild statically-linked third party applications after installing SLS OSS601A
7. A known, minor date-processing issue with the mcart(C) utility (for Irwin minicartridge tape drives) that is _not_ fixed by SLS OSS601A
These issues are fully discussed below.-------------------------------------------------------------------1. Order of installation issues with other SLSs and RS504C
-------------------------------------------------------------------The following supplements, when installed _after_ OSS601A, will cause a few date and time fixes contained in OSS601A to be lost; the specific fixes lost are listed in parentheses:
- Release Supplement 504C (RS504C) for SCO OpenServer 5.0.4 (ftpd(NADM) fix, SCO tracking number: RUS-1-32) (System Time Manager fix, SCO tracking number: SCO-59-8655)
- SLS OSS465B: Scomail Supplement for SCO OpenServer 5.0.2, 5.0.4 (scomail(XC) fix, SCO tracking number: RUS-1-34)
- SLS OSS449F: Network Maintenance Supplement for SCO OpenServer 5.0.2, 5.0.4 (ftpd(NADM) fix, SCO tracking number: RUS-1-32)
To avoid loss of these fixes, you must install SLS OSS601A after applying any combination of the above supplements. If you have already applied any of the above supplements after applying OSS601A, you should roll back these supplements and OSS601A, re-apply the supplements, and apply OSS601A _last_.
NOTE: Even though RS504C is not a prerequisite for installation of OSS601A on SCO OpenServer 5.0.4, nevertheless RS504C is strongly recommended as a baseline supplement for this OpenServer release. Therefore, RS504C appears on the Support "minimum patch listing" for OpenServer 5.0.4 at http://www.sco.com/support/toolbox. Not requiring RS504C for installation of OSS601A affords the most flexibility in situations where the "touch cost" associated with patching a large number of systems can become prohibitive.
-------------------------------------------------------------------2. Order of installation issues with both the OpenServer Development System and the UnixWare/OpenServer Development Kit (UDK) Release 7.0.0
-------------------------------------------------------------------OPENSERVER DEVELOPMENT SYSTEM:If you install SLS OSS601A before the OpenServer Development System, then the Development System portions of OSS601A do not get applied (because there is no relevant software to patch at the time OSS601A is applied).
To resolve this problem, you may simply choose to install only the Development System components of SLS OSS601A after you have installed the Development System itself.
If you would like, you can also roll back OSS601A and re-apply it after installing the Development System.
UNIXWARE/OPENSERVER DEVELOPMENT KIT (UDK) RELEASE 7.0.0:On an OpenServer 5.0.2 system, if you install SLS OSS601A before attempting to install the UDK, the UDK may fail to install.
This issue does not apply to OpenServer 5.0.4.
As a workaround, roll back SLS OSS601A, install the UDK, then re-apply OSS601A.
-------------------------------------------------------------------3. You must reboot your system for the date and time fixes in SLS OSS601A to fully take effect
-------------------------------------------------------------------SLS OSS601A contains date and time fixes to the dynamic shared C
language library (libc.so.1). These fixes will only affect
applications that are started after installation of OSS601A.
Programs started before the installation of OSS601A that utilize
the portions of libc.so.1 that are fixed by OSS601A will not have
access to these fixes, and must be restarted in order for the fixes
to be activated for these applications.Since it is impossible to find the exact SCO binaries and utilities as well as third-party applications that may be affected, it is required that you reboot your system for the date and time fixes in libc.so.1 to fully take effect in _any_ process. There are no known problems with continuing to run the system without rebooting, but the long term effects are not currently known; hence, it is strongly recommended that a reboot occur sometime shortly after installing OSS601A -- certainly before the year 2000.
-------------------------------------------------------------------4. custom(ADM) verification errors during install of OSS601A on OpenServer 5.0.2
-------------------------------------------------------------------During the installation of SLS OSS601A on OpenServer 5.0.2, a
software verification operation is performed as a routine part of
the install. It is possible that size and/or checksum errors for
the files ".../pack.d/crllry/Driver.a" and/or
".../pack.d/str/Driver.o" may appear as a result of this procedure;
the error will appear as a pop-up window stating that "verification
errors have been found", and the exact pathnames of the above files
can be found in the "Details" of the error message. This message
may be safely ignored, and you should choose "Continue" to complete
the installation.-------------------------------------------------------------------5. Problems with "Loading" OSS601A on OpenServer 5.0.2 before "Applying" it
-------------------------------------------------------------------It is recommended that you do not load SLS OSS601A on OpenServer
5.0.2 prior to applying it. (Loading a patch makes it available
for network installation to other machines on your network, but
does not apply the patch to software on the machine on which it
was loaded.) If you load OSS601A and then later unload it _before_
rolling it back, you will lose libc.so.1 and the system will become
unusable. Unless your machine must be used to install this patch
over your network to other OpenServer machines, it is recommended
that you avoid this possibility by not loading OSS601A.-------------------------------------------------------------------6. You must rebuild statically-linked applications after applying SLS OSS601A
-------------------------------------------------------------------The Development System portion of SLS OSS601A furnishes date and time fixes for the static C language and extended Tcl libraries. Statically-linked applications built before installing OSS601A must be rebuilt in order for these applications to contain the date and time fixes to these libraries.
-------------------------------------------------------------------7. Known, minor date processing issue with the mcart(C) utility
-------------------------------------------------------------------The mcart(C) utility in OpenServer 5.0.2 and 5.0.4 is known to
print the values 100 and 101 for the years 2000 and later, for
the year in which the tape was factory-formatted. The associated
SCO tracking number is SCO-247-146. This problem is fixed in SLS
OSS600A, the Year 2000 Supplement for SCO OpenServer 5.0.5. No
fix is currently available for SCO OpenServer 5.0.2 and 5.0.4.This cosmetic problem specifically affects the undocumented "getheader" option to mcart(C), and only applies to tapes that were factory-formatted after January 1, 2000.
See also
ta110077, "What is addressed by SLS OSS601A, the Year 2000 Supplement for SCO OpenServer 5.0.2 and 5.0.4?"
ta110051, "What Date and Time processing fixes are included in SLS OSS601A?"