Problem
I configured printing to an HP Jet Direct Network printer. How can I suppress the banner page and form feed? I tried changing the interface file in /usr/spool/lp/admins/lp/interfaces, but this did not make a difference. Also, I did not find a file in /usr/spool/lp/admins/lp/interfaces for the Network printer.
Cause
The interface file for non-HP Jet Direct printers is found in the directory /usr/spool/lp/admins/lp/interfaces. The interface file has the same name as the printer. However, when print services for an HP Jet Direct network printer are configured, a new directory is created. It is /usr/spool/lp/admins/lp/interfaces/model.orig. It is in this directory that the interface file for the HP Jet Direct printer will be found.
Solution
Edit the interface file in the directory:
/usr/spool/lp/admins/lp/interfaces/model.origthat has the same name as the HP Jet Direct printer. Search for lines containing the word "banner".
For SCO UNIX Version 4.2 systems, the lines will read:
nobanner="no"Change them to:nobanner="yes"For SCO OpenServer 5.0.x systems, the lines will read:
banner="yes"Change them to:banner=""NOTE: If you have copied an interface file for a serial or parallel
printer into the model.orig directory to use as the interface
file for your HP Jet Direct printer, be sure to edit out any
stty commands as they will generate email error messages. See also
TA102824, "What is the HP Jet Direct Extended Feature Supplement?"