Technical article 105279

Telnet from Windows 95 or 98 WIN-32 TCP/IP to SCO OpenServer 5 causes 'stair-cased' output.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

When I use telnet to connect to an SCO OpenServer 5 system from a
Microsoft Windows 95 or 98 workstation, output is staircased whenever
the <Del> key is pressed.  stty opost and the correct terminal
type have been set.

Cause

This is due to a problem with the WIN-32 TCP/IP stack.  SCO
OpenServer 5, in response to the interrupt character, is sending
a telnet data mark (IAC, DM) back to the Windows system. It is
correctly marked as urgent data, but the WIN-32 stack is failing
to handle the urgent data correctly.

Solution

Contact Microsoft for a corrected WIN-32 TCP/IP stack.

A workaround for this problem is provided below:

As root, set the OpenServer 5 TCP/IP stack to run in RFC 1122 mode by running:

inconfig tcp_urgbehavior        0

There is no need to reboot the system.

From now on, the Windows 95 or 98 telnet client will not 'staircase', but it will print the <Del> character.

From the Xinuos technical article database, record 105279. Reproduced with permission. The original is at www.sco.com/ta/105279, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.