Technical article 107652

Telnet sessions hang when sending large amounts of data.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

After I telnet into an SCO system, I run a command like:

ls -lR
-OR-
find /
which streams large amounts of data over the network connection.
After a short time, the connection stops working.  "netstat -a"
on the SCO side may show the connection as active, or it may
show that is has dropped.  In rare cases, the entire SCO box
may lock up.
The network card is a PCI or EISA card.  Disabling bus-mastering
will usually, but not always, make the problem go away.

Solution

This is caused by a known problem in the tcp driver.  This
problem has been addressed by the Network Performance
Supplement, SLS OSS449A.

See also

TA107704, "What is the SLS OSS449F Network Maintenance Supplement?"

From the Xinuos technical article database, record 107652. Reproduced with permission. The original is at www.sco.com/ta/107652, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.