Technical article 112524

TermLite 1.10, installed or run from an OpenServer 5.0.6 VisionFS (3.10.905) server, loses its previous configuration when you "connect" to a machine.

OpenServer 5.0.6

Written · Last revised

Problem

Configuration changes (screen color, cursor, and so on) are lost when the user tries to "connect" to another system.

Note that this occurs when you exit and restart TermLite. The settings will remain active for the duration of your TermLite session.

Solution

To work around this, you can apply your configuration changes again once you are connected to the machine.

From the Xinuos technical article database, record 112524. Reproduced with permission. The original is at www.sco.com/ta/112524, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.