Technical article 104801

The end of the boot division is greater than 1024 cylinders by 14Mb.

OpenServer 5.0.0

Written · Last revised

Problem

I am installing an OpenServer Release 5.0.0 system and I have
chosen the Customize option within the Installation Query
Manager (IQM) to modify the sizes of the filesystems on
my hard disk.  When I press <Enter> to accept the changes,
this warning occurs:

The end of the boot division is greater than 1024 cylinders by 14Mb. This might make your system unbootable.

I have checked my system configuration and have confirmed that this statement is incorrect as:

1. My disk does not have more that 1024 cylinders

2. My /boot division is at the start of the disk

or

3. My /boot division is close enough to the start of my disk so as not to exceed 1024 cylinders

Cause

This problem occurs on some systems where there is currently no active partition on the hard disk. The problem is caused by a flaw in the coding of the IQM.

Solution

In SCO OpenServer 5.0.0, to modify the locations, sizes, and names of filesystems at install time, use the Interactive fdisk/divvy option instead of the Customize option.

This problem has been fixed in SCO OpenServer Release 5.0.2.

From the Xinuos technical article database, record 104801. Reproduced with permission. The original is at www.sco.com/ta/104801, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.